Asphalt Roller Rental

Our Asphalt Roller, a Wacker RD-12A ride-on, is well suited for asphalt repairs on roads, driveways, parking lots, and any other asphalt surface as well for compaction of soil, sand, gravel, crushed concrete or limestone, and even leveling your lawn.  This duel drum asphalt roller is 40.7 inches wide overall, 71.8 inches tall (with the roll bar up) and has an operating weight of 2689 lbs. 

It features a 20 hp. Honda GX630 which propels this machine 5.4 mph and holds 6.1 gallons of gasoline allowing the machine to operate several hours before needing to be refueled.  The water tank holds 26.4 gallons and has a positive pressure pump delivering a consistent flow of water with 8 variable speeds allowing the operator to adjust the water flow to match the conditions.  The drums are 35.4 inches wide and delivers 3400 lbf (front drum) of centrifugal force due to its higher frequency exciter, which allow for higher compaction at a faster rate of speed.

Features:

This is an easily maneuverable Asphalt Roller and provides flush compaction to curbs and obstructions.

The pressurized water system offers consistent water flow and an eight position timer allows the operator to adjust water flow to match conditions.

High performance rollers offer excellent compaction results and reduced sound levels.

Ideally suited for compaction of granular base surfaces and finish layers on road repairs, driveways, parking lots and any asphalt surface.

Technical specifications RD12A-90

Operating data

Operating weight w/ ballast: kg 1,220

Length: 73 inches / Width – 41.4 inches

Drum width:  mm 900

Drum diameter:  mm 560

Side clearance Right: mm 45

Side clearance Left: mm 89

Curb clearance Right: mm 400

Curb clearance Left: mm 208

Centrifugal force Dynamic (Front Drum): kN 15

Frequency: Hz 70

Linear force Static (Front/Rear): N/mm  4.9 / 7.1

Linear force Dynamic (Front): N/mm 16.8

Travel speed Forward: km/h 8.7

Travel speed Reverse km/h 8.7

Surface capacity Area: m/h 7,830

Gradeability Maximum: % 30

Turning radius Outside: mm 2,451

Engine / Motor

Engine / Motor type:   air-cooled, 2-cylinder, gasoline engine

Engine / Motor manufacturer: Honda GX 630

Displacement:  cm 688

RPM / speed Operating Speed: rpm 3,100

Operating performance Max Rated at 3600 rpm kW  15.3

Fuel consumption:  l/h  6 6

Tank capacity Fuel: l  23

Tank capacity Water: l  100